|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
11-FD216 Version : A.010 Issue Date : 2006/12/28 File Name : SP-FD216-A.010.doc Total Pages : 6 Brushless Vibrator Driver Built-in Hall Sensor 9 7 1 SILICON TOUCH TECHNOLOGY INC. 9-7F-1, Prosperity Road I, Science Based Industrial Park, Hsin-Chu, Taiwan 300, R.O.C. Tel886-3-5645656 Fax886-3-5645626 11-FD216 Brushless Vibrator Driver Built-in Hall Sensor General Specifications The device is designed specifically for brushless DC motor applications without any external components, such as vibrator, ultra-small blushless motor. Each device includes a HALL sensor, a lock detection circuit to shut down the driver output for the lock prevention, and complementary bi-directional drivers for driving and sinking coil load. If the motor rotation is stall by external forces or obstacles, the drivers will shut down roughly 0.5 to 2 seconds after the motor is locked. When the drivers shut down, the automatic self-restart circuit will try to power up the drivers every 0.5 to 2 seconds till the motor locking is released. Pin Description NO. 1 2 3 4 5 6 NAME O2 NC VSS O1 NC VDD Description Output Driver2 No Connection Ground Output Driver1 No Connection Power Features and Benefits Optimized for small Brushless DC Motor applications Low voltage operation Built-in Hall effect sensor Built-in Reverse Protection Lock detection and automatic self-restart without external capacitor High sinking and driving output capability Thin, highly reliable package (CSP6) Brushless Vibrator Driver Built-in Hall Sensor VersionA.010 Page1 Unauthorized reproduction, duplication, use or disclosure of this document will be deemed as infringement. 11-FD216 Absolute Maximum Ratings ( Unless otherwise noted, TA = 25 C ) Characteristic Supply Voltage Output Current Power Dissipation Thermal Resistance, Junction to Ambien Operating Temperature Range Storage Temperature Range Symbol VDD IOUT PD JA TOPR TSTG Rating 5.5 200 400 70 -40 ~ 125 -65 ~ 150 Unit V mA mW C/ W C C Electrical Characteristics (Unless otherwise noted,TA= 25C , VDD= 3V ) Characteristic Supply Voltage Operating Point Release Point Hystersis Output Voltage High Output Voltage Low Output Current On Time Duty Ratio Sym. VDD BOP BRP BHYS VOH VOL IOUT TON RDR IOUT = 100 mA IOUT = 100 mA RL = 30 TOFF / TON Condition Min. Operating 1.8 2.6 Magnetic Specifications ( TJ = 25) 1.0 -1.0 2.0 2.85 0.3 85 156 3 10 -10 20 0.5 mT mT mT V V mA ms Limit Typ. 3 Max. 4.5 V Unit O1/O2 Output Terminal ( TJ = 25) Automatic Self-Restart Circuit Driver Output v.s. Magnetic Pole Magnetic Field North magnetic pole South magnetic pole O1 H L O2 L H Brushless Vibrator Driver Built-in Hall Sensor VersionA.010 Page2 Unauthorized reproduction, duplication, use or disclosure of this document will be deemed as infringement. 11-FD216 Block Diagram & Application Circuit POWER VDD POWER LOGIC BLOCK O1 HALL Sensor GND LOCK DETECTION O2 Application Notes The connection of the capacitor or Zener Diode between VDD and GND will increase stability of operation, if required. Brushless Vibrator Driver Built-in Hall Sensor VersionA.010 Page3 Unauthorized reproduction, duplication, use or disclosure of this document will be deemed as infringement. 11-FD216 Package Specifications ( CSP6 ) 6 4 Top View Zxx 1 * * The "xx" in package marking are date code, and therefore being subject to change. Unit : mm 3 0.30typ 0.20typ 0.425max Bottom View 1 3 0.3 1.600.05 1.30 0.20 Hall Plate 0.715 typ. 0.3typ 6 0.05 0.50typ 1.400.05 4 0.02typ 0.325 typ 0.3 0.30 0.425max 0.127 0.02 typ Brushless Vibrator Driver Built-in Hall Sensor VersionA.010 Page4 Unauthorized reproduction, duplication, use or disclosure of this document will be deemed as infringement. 11-FD216 The products listed herein are designed for ordinary electronic applications, such as electrical appliances, audio-visual equipment, communications devices and so on. Hence, it is advisable that the devices should not be used in medical instruments, surgical implants, aerospace machinery, nuclear power control systems, disaster/crime-prevention equipment and the like. Misusing those products may directly or indirectly endanger human life, or cause injury and property loss. Silicon Touch Technology, Inc. will not take any responsibilities regarding the misusage of the products mentioned above. Anyone who purchases any products described herein with the above-mentioned intention or with such misused applications should accept full responsibility and indemnify. Silicon Touch Technology, Inc. and its distributors and all their officers and employees shall defend jointly and severally against any and all claims and litigation and all damages, cost and expenses associated with such intention and manipulation. Brushless Vibrator Driver Built-in Hall Sensor VersionA.010 Page5 Unauthorized reproduction, duplication, use or disclosure of this document will be deemed as infringement. |
Price & Availability of 11-FD216 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |